What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 26.06.2025 18:48

I post the exact comment here.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Utah woman loses 100 pounds in one year: Here's how - KSL.com
but this device (an Inductor) … impedes the rapid changes in the current.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
[old diagram got deleted by accident]
All New GTA Online Vehicles In Money Fronts Update And Prices Revealed - RockstarINTEL
One is “what exactly is in a ‘surge protector’ ? ”
2024–10–16 [ OO OLAOYE OYEBODE ]
He then asserts :
What does a fuse do?
It seems Mohan does not understand the difference between a comment and an Answer.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Upvotes:
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Why do people ask stupid questions on Quora when they instead could ask ChatGPT?
So, the voltage could go up to 500 volts, and the fuse will not open up.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
2024–10–14 [Omar Gharbi Omar Gharbi ]
How does it feel to watch your wife get fucked hard?
(Dc diagram shown, AC is similar).
This is the picture of an electronic coil of wire wound around a core of magnetic material.
It also is a device that limits the change in current flow.
Which is the best face wash for oily skin?
An AC voltage/ current source, and an ac inductive load.
What is lightning?
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Murkowski suggests she could become an Independent in the right circumstance - Politico
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
[image of Common-mode choke]
These devices are installed between the “hot” and “neutral” and protective ground.
UPDATE: Additional measles exposure locations in Marquette, Delta counties - Upper Michigan's Source
At least they know the answer if they wanted it.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
A fuse is a non-resetable over current circuit protector.
The third is lightning and “how it gets conducted into a home.”
This is where this question deviates from being a 'generic' question, and becomes more specific.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
but I think this circuit , shows a few more pieces.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
The MOV will conduct when the voltage exceeds 50% of line voltage.
At one ohm, the resistor has a maximum of 1 watt power.
In schematic diagrams this is the symbol for a fuse:
There are three different concepts here that are getting confused.
He then describes Rainy Season and Lightning.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
These are simplified answers to the original question, and does not change anything I wrote above.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
The bolt then partially travels down the line to your home.
Because the load is inductive, the current lags the voltage.(by a bit).
For this case there are devices called Metal oxide varistors (MOV).
so, what happens?
eight
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
This is 'the assistant's answer'
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
He then describes the function of a fuse.
Edit 2024–10.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
2024–10–10[John johnson John Johnson ]
Can the fuse protect the electronic devices from lightning instead of a surge protector.
a photo is worth a thousand words.
But… the neutral is now “floating” because of the 1 ohm resistance.
A circuit breaker is similar, but is resettable.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
nine
One
This one hit behind the barn.
what exactly is a ‘surge’ protector?
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
But it can get overloaded, and no longer works.
Here is a simplified AC power diagram.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
the problem then depends on "how fast does the fuse operate?".
Barnstars:
This device then solves the entire problem.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
First Sentence:
The other is “what does a “fuse” do?”
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
This is where the MOV conducts again, and dissipated the energy.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
There are two important concepts here.
Now when you have a certain ac resistance, then a current flows in a loop.